Vehicle Exterior

Installation

~2min read
0102030405097N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

BACK DOOR DAMPER STAY LOWER BRACKET

68948

-

-

2

BACK DOOR DAMPER STAY UPPER BRACKET

68946

-

-

3

POWER BACK DOOR UNIT ASSEMBLY SET

68920

-

-

4

BACK DOOR TRIM PANEL ASSEMBLY

64780A

-

-

-

5

BACK DOOR SIDE GARNISH LH

67938A

-

-

-

6

BACK DOOR SIDE GARNISH RH

67937B

-

-

-

7

BACK DOOR TRIM UPPER PANEL ASSEMBLY

64790B

-

-

-

8

INSPECT POWER BACK DOOR SYSTEM

-

-

-

9

INITIALIZE POWER BACK DOOR SYSTEM

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET

Cleaning Area

Arrow Mark

(1) Clean the bolt holes in the back door.

(2) Temporarily install the back door damper stay lower bracket with the 2 new bolts.

HINT:

With the door closed, install the back door damper stay lower bracket so that the arrow marker is facing the top side of the vehicle.

(3) Tighten the 2 bolts in the order shown in the illustration.

Torque:

9 N·m {92 kgf·cm, 80 in·lbf}

2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET

Cleaning Area

Arrow Mark

(1) Clean the bolt holes in the vehicle body.

(2) Temporarily install the back door damper stay upper bracket with the 2 new bolts.

HINT:

With the door closed, install the back door damper stay upper bracket so that the arrow marker is facing the top side of the vehicle.

(3) Tighten the 2 bolts in the order shown in the illustration.

Torque:

9 N·m {92 kgf·cm, 80 in·lbf}

3. INSTALL POWER BACK DOOR UNIT ASSEMBLY SET

CAUTION:

  • Do not perform work if the back door is not securely supported.
  • The back door could fall, resulting in injury.

4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

Click here

5. INSTALL BACK DOOR SIDE GARNISH LH

Click here

6. INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.

7. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY

Click here

8. INSPECT POWER BACK DOOR SYSTEM

Click here

9. INITIALIZE POWER BACK DOOR SYSTEM

Click here