Vehicle Exterior

Removal

~2min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

BACK DOOR TRIM UPPER PANEL ASSEMBLY

64790B

-

-

-

2

BACK DOOR SIDE GARNISH LH

67938A

-

-

-

3

BACK DOOR SIDE GARNISH RH

67937B

-

-

-

4

BACK DOOR TRIM PANEL ASSEMBLY

64780A

-

-

-

5

POWER BACK DOOR UNIT ASSEMBLY SET

68920

-

-

6

BACK DOOR DAMPER STAY UPPER BRACKET

68946

-

-

-

7

BACK DOOR DAMPER STAY LOWER BRACKET

68948

-

-

-

●

Non-reusable part

-

-

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY

Click here

2. REMOVE BACK DOOR SIDE GARNISH LH

Click here

3. REMOVE BACK DOOR SIDE GARNISH RH

(a) Use the same procedure as for the LH side.

4. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

Click here

5. REMOVE POWER BACK DOOR UNIT ASSEMBLY SET

CAUTION:

  • Do not perform work if the back door is not securely supported.
  • The back door could fall, resulting in injury.

*1

Grommet

*2

Stop Ring

(1) Disconnect the connector.

(2) Disengage the grommet

(3) Using a screwdriver with its tip wrapped in protective tape, slightly raise the 2 stop rings and remove the power back door unit assembly set.

CAUTION:

Remove the power back door unit assembly set while supporting the back door by hand.

NOTICE:

Do not remove the stop rings from the power back door unit assembly set. Raise the stop rings just enough to allow the ball joints to be disengaged.

6. REMOVE BACK DOOR DAMPER STAY UPPER BRACKET

7. REMOVE BACK DOOR DAMPER STAY LOWER BRACKET