General
Removal
In this manual: General
~1min read
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
IGNITION COIL ASSEMBLY |
19500 |
- |
- |
|
2 |
SPARK PLUG |
19100P |
- |
- |
|
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/ReplacedReplaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
|
Inspection after repair |
|
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![]()
PROCEDURE
1. REMOVE IGNITION COIL ASSEMBLY
![]() |
Click here |
2. REMOVE SPARK PLUG
![]() |
NOTICE: If a spark plug has been struck or dropped, replace it. |

Was this page helpful?
.png)
.png)
.png)
.gif)