General

Removal

~1min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

TRANSMITTER HOUSING COVER

89751A

-

-

2

DOOR CONTROL TRANSMITTER SUB-ASSEMBLY

89071C

-

-

-

3

TRANSMITTER BATTERY

89745A

-

-

*1

TRANSMITTER BATTERY COVER

*2

TRANSMITTER BATTERY CASE

*3

TRANSMITTER HOUSING CASE

-

-

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during door control transmitter assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Door control transmitter assembly

Code registration

Register a new recognition code

Register a new recognition code

Wireless door lock control system (w/o Smart Key System)

PROCEDURE

1. REMOVE TRANSMITTER HOUSING COVER

Click here

2. REMOVE DOOR CONTROL TRANSMITTER SUB-ASSEMBLY

Click here

3. REMOVE TRANSMITTER BATTERY

NOTICE:

  • Do not push the terminals with your finger.
  • Do not forcibly pry up the transmitter battery as the terminals may be damaged.
  • Do not touch the transmitter battery with wet hands. Moisture may cause rust.
  • Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.
  • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

Remove in this Direction

-

-