Audio & visual system

Antenna cord sub-ASSY NO.3

~1min read

REPLACEMENT

HINT:

  • COMPONENTS: See page 76-21
  • Installation is in the reverse order of removal.

1. REMOVE ROOF HEADLINING ASSY (SEE PAGE 76-21 )

HINT: Refer to the procedures up to "REMOVE ROOF HEAD LINING ASSY".

2. REMOVE ANTENNA CORD SUB-ASSY NO.3

(a) Remove the antenna cord sub assy No. 3 from the roof headlining.

3. INSTALL ANTENNA CORD SUB-ASSY NO.3

(a) Tape the antenna cord sub-assy No. 3 at the position of the roof headlining shown in the illustration.

NOTICE: The antenna cord sub assy should come to the center of the tape (100 mm x 25 mm) when taped.

Try not to touch the adhesive side of the tape when taping.

INSTALL ANTENNA CORD SUB-ASSY NO.3

4. INSTALL ROOF HEADLINING ASSY (SEE PAGE 76-21 )

HINT: Refer to the procedures from "INSTALL ROOF HEAD LINING ASSY".