Audio & visual system
W/holder antenna ASSY
In this manual: Audio & visual system
~1min read
REPLACEMENT
HINT:
- COMPONENTS: See page 76-21
- Installation is in the reverse order of removal.
1. REMOVE GLOVE COMPARTMENT DOOR ASSY (SEE PAGE 71-10 )
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2 (SEE PAGE 71-10 )
3. REMOVE FRONT PILLAR GARNISH RH (SEE PAGE 71-10 )
4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSY LH (SEE PAGE 76-2 )
5. REMOVE W/HOLDER ANTENNA ASSY

(a) Disconnect the connector,and remove the bolt.
(b) Remove the 2 clamps.

(c) Tie the string at the tip of the cable of the w/holder antenna assy.
(d) Remove the antenna nut and ornament antenna.

(e) Remove the nut and w/holder antenna assy.
6. INSTALL W/HOLDER ANTENNA ASSY
(a) Install the w/holder antenna assy with the nut. (b) Install the antenna nut and ornament antenna.(c) Use the string to put the cable of the w/holder antenna assy.
(d) Install the 2 clamps.(e) Connect the connector, install the bolt.
Was this page helpful?