Body Electrical
Inspection
In this manual: Body Electrical
~1min read
1. INSPECT SLIDING ROOF SWITCH CONTINUITY


If continuity is not as specified, replace the switch.
2. INSPECT SLIDING ROOF CONTROL ASSEMBLY CIRCUIT

Disconnect the connector from the ECU and inspect the connector on the wire harness side, as shown in the chart.

*: Exceptions: During 45 second period after ignition switch ON"OFF (ACC) or until driver or passenger door is opened after ignition switch ON"OFF (ACC).
If circuit is as specified, replace the relay.
LOCATION

Test yourself
A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?