Toyota Land Cruiser Quiz
Automatic Transmission

On-vehicle repair

In this manual: Automatic Transmission
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040501310N·mlb·ft
Tightening torque found on this page

1. REMOVE ENGINE NO. 2 UNDER COVER

2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

3. REMOVE PARK/NEUTRAL POSITION SWITCH

REMOVE PARK/NEUTRAL POSITION SWITCH
(a) Pry off the lock washer and remove the nut.

(b) Remove the bolt and park/neutral position switch.

4. INSTALL PARK/NEUTRAL POSITION SWITCH

(a) Install the park/neutral position switch with the bolt.

Torque: 13 N·m

(b) Install a new lock washer and the nut.

Torque: 6,9 N·m

(c) Bent the claws on the lock washer to stake the nut.

(d) Adjust the park/neutral position switch ( DI-361 ).

5. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

6. INSTALL ENGINE NO. 2 UNDER COVER

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.