Caution:Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
Remove rear combination light assembly
Remove the 3 nuts and disconnect the connector.
Detach the clip and remove the light.
DisassemblyHint:
Use the same procedures for the rh and lh sides.
The procedures listed below are for the lh side.
Remove rear combination light bulb
Turn the 3 bulbs in the direction indicated by the arrows and pull to remove them.
ReassemblyHint:
Use the same procedures for the rh and lh sides.
The procedures listed below are for the lh side.
Install rear combination light bulb
Turn the 3 bulbs in the direction indicated by the arrows to install them.
?
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.