Toyota Sienna Quiz
Door lock

Terminals of ECU

In this manual: Door lock
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
6steps
~36min
2/5difficulty
Done 0 of 6

1. INSTRUMENT PANEL JUNCTION BLOCK (MULTIPLEX NETWORK BODY ECU)

  1. Disconnect the B6, B7 and B9 ECU connectors.
  2. Disconnect the 1A, 1C, 1K, 1L and 1P J/B connectors.
    INSTRUMENT PANEL JUNCTION BLOCK
  3. Check the voltage or resistance according to the value(s) in the table below (wire harness side connector).
    INSTRUMENT PANEL JUNCTION BLOCK

HINT: If the result is not as specified, there may be a malfunction on the wire harness side.

  1. Reconnect the B6, B7 and B9 ECU connectors.
  2. Reconnect the 1A, 1C, 1K, 1L and 1P J/B connectors.
  3. Check the voltage according to the value(s) in the table below (ECU side connector).
    INSTRUMENT PANEL JUNCTION BLOCK

If the result is not as specified, the instrument panel J/B (multiplex network body ECU) may have a malfunction.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.