Fuel Pump Ecu

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. REMOVE FUEL PUMP CONTROL ECU

(a) Disconnect the 2 connectors.

(b) Remove the 2 nuts and fuel pump control ECU. NOTICE: Make sure the fuel pump control ECU is not subjected to physical shocks, such as being dropped, etc.

1. INSTALL FUEL PUMP CONTROL ECU

(a) Install the fuel pump control ECU with the 2 bolts.

Torque:

20 N·m {199 kgf·cm, 14 ft·lbf}

NOTICE:

Do not use the fuel pump control ECU if it has been subjected to physical shocks, such as being dropped, etc.

(b) Connect the 2 connectors.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here