Engine, Hybrid System
Camshaft Position Sensor
In this manual: Engine, Hybrid System
~1min read
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL CAMSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(b) Connect the sensor connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY

Removal
REMOVAL
PROCEDURE
1. REMOVE V-BANK COVER SUB-ASSEMBLY

2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
Was this page helpful?