Engine, Hybrid System
Crankshaft Position Sensor
In this manual: Engine, Hybrid System
~1min read
ComponentsCOMPONENTSILLUSTRATION
InstallationINSTALLATIONPROCEDURE1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Install the sensor with the bolt. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (b) Connect the sensor connector. 2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
RemovalREMOVALPROCEDURE1. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the sensor connector. (b) Remove the bolt and sensor. |
Was this page helpful?

