Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
Cruise Vehicle Speed |
Vehicle speed |
Min.: 0 km/h
Max.: 255 km/h |
Actual vehicle speed |
- |
Cruise Memory Vehicle Speed |
Stored vehicle speed |
Min.: 0 km/h
Max.: 255 km/h |
Stored vehicle speed |
- |
Cruise Request Throttle Opening Angle |
Cruise requested position |
0 to 124.99° |
When cruise is set (vehicle in motion at 80 km/h): Actual requested throttle position |
- |
Vehicle Acceleration |
Acceleration condition while driving the vehicle |
-13.1 to 13.1 m/s2 |
Current value displayed |
- |
Cruise Target Acceleration |
Target acceleration while in cruise control mode |
-13.1 to 13.1 m/s2 |
Current value displayed |
- |
Driving Support ECU Target Acceleration |
Target acceleration of driving support ECU |
-13.1 to 13.1 m/s2 |
- |
This item is displayed on the Techstream but is not used. |
Acceleration Continuation Decision |
Acceleration continuation decision condition |
ON or OFF |
- |
This item is displayed on the Techstream but is not used. |
Output Driving Force |
Generated drive torque |
-10.0 to 9.92 kN |
- |
This item is displayed on the Techstream but is not used. |
Cruise Request Driving Force |
Cruise request torque signal |
-10.0 to 9.92 kN |
Differs according to the cruise control system condition |
- |
Cruise Request Driving Force Feedback Status |
Cruise request driving force feedback mode |
No Control, Suspend, Neg Calc Prohibited, Pos Calc Prohibited, Normal or Increasing at Start |
- |
This item is displayed on the Techstream but is not used. |
Cruise Control Permission Condition |
Cruise control system condition |
OK or NG |
- |
This item is displayed on the Techstream but is not used. |
Cruise Control Condition |
Cruise control system active condition |
No Control, Constant Speed Control Mode - Ready, Constant Speed Control Mode - Controlling, Vehicle Distance Control Mode - Ready, Vehicle Distance Control Mode - Controlling, Termination Control, Suspend or Abnormal Stop |
- |
This item is displayed on the Techstream but is not used. |
Cruise Control Mode |
Cruise control mode condition |
No Control or Constant Speed Control Mode, Vehicle Distance Control Mode |
No Control: Cruise control mode not operating Constant Speed Control Mode: Constant speed control mode operating
Vehicle Distance Control Mode: Vehicle distance control mode operating |
- |
Cruise Request Gear Position |
Shift request from ECM |
None or 255 Gear |
Shift request from cruise control system |
- |
Cruise Acceleration and Deceleration Operation Condition |
Cruise acceleration and deceleration operation condition |
No Control, Constant Speed Control Mode
- Standby, Constant Speed Control Mode
- RES SW Control, Constant Speed Control Mode - ACC SW Control, Constant Speed Control Mode - COAST SW Control, Constant Speed Control Mode - Tap Down Control, Constant Speed Control Mode - Tap Up Control, Vehicle Distance Control Mode - Vehicle Stop, Vehicle Distance Control Mode - Standby, Vehicle Distance Control Mode - Acceleration Operation or Vehicle Distance Control Mode - Deceleration Operation |
- |
This item is displayed on the Techstream but is not used. |
Cancel Switch |
CANCEL switch status |
ON or OFF |
ON: CANCEL switch on
OFF: CANCEL switch off |
- |
-SET Switch |
-SET switch status |
ON or OFF |
ON: -SET switch on
OFF: -SET switch off |
- |
+RES Switch |
+RES switch status |
ON or OFF |
ON: +RES switch on
OFF: +RES switch off |
- |
Cruise Main Switch Operation Condition |
Cruise control main switch (ON-OFF button) status |
ON or OFF |
ON: Cruise control main switch (ON-OFF button) pushed
OFF: Cruise control main switch (ON-OFF button) not pushed |
- |
Cruise Ready Main-CPU |
Cruise control system standby condition |
ON or OFF |
Each time cruise control main switch (ON-OFF button) is pushed, ON or OFF changes |
- |
Cruise Ready Sub-CPU |
Cruise control system standby condition |
ON or OFF |
Each time cruise control main switch (ON-OFF button) is pushed, ON or OFF changes |
- |
Accelerator Pedal |
Condition of the accelerator pedal during cruising |
ON or OFF |
ON: Accelerator pedal depressed
OFF: Accelerator pedal released |
- |
Stop Light Switch Sub-CPU |
Stop light switch signal |
ON or OFF |
- |
This item is displayed on the Techstream but is not used. |
Request Manual Cancel |
Whether there is a manual cancel request |
ON or OFF |
- |
This item is displayed on the Techstream but is not used. |
Request Automatic Cancel |
Whether there is an automatic cancel request |
ON or OFF |
- |
This item is displayed on the Techstream but is not used. |
Cruise Brake Control Decision |
Cruise brake control decision |
ON or OFF |
- |
- |
Cruise Brake Control Permission Condition |
Cruise brake control permission condition |
OK or NG |
- |
This item is displayed on the Techstream but is not used. |
Cruise Indicator |
Cruise control indicator status |
ON or OFF |
ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off |
- |
Wheel Speed Sensor and Deceleration Sensor |
Speed sensor signal and deceleration sensor signal condition |
Avail or Not Avl |
Avail: Speed sensor signal and deceleration sensor signal available
Not Avl: Speed sensor signal and deceleration sensor signal not available |
- |
Gradient of Road Surface |
Gradient of road surface condition |
-32.76 to 32.76 m/s2 |
- |
This item is displayed on the Techstream but is not used. |
Brake Cancel Switch |
Stop light switch status |
ON or OFF |
ON: Brake pedal depressed
OFF: Brake pedal released |
- |