If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See page" below.
Power Tilt and Power Telescopic Steering Column System
DTC Code
Detection Item
DTC Detection Condition
See page
B2603
Tilt and Telescopic Manual Switch Circuit Malfunction
When operating the tilt and telescopic switch (headlight dimmer switch assembly), an abnormal voltage value is sent to the multiplex tilt and telescopic ECU.
B2610
Tilt Position Sensor or Tilt Motor Circuit Malfunction
Tilt operation stops within the operation range while operating.
B2611
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction
Telescopic operation stops within the operation range while operating.
B2620
ECU Power Source Circuit Malfunction
The voltage of the ECU power source drops to 8 V or less and this condition continues for 10 seconds or more.
B2624
Vehicles Speed Malfunction
The auto away function is disabled with the last vehicle speed signal (If the ignition switch is turned off immediately after the vehicle comes to a sudden stop, the last vehicle speed signal may not be 0 km/h.) of 10 km/h or more.
The vehicle speed signal is lost for 5 seconds or more and the auto away/return function is disabled.
U0142
Lost Communication with Main Body ECU
Lost communication with main body ECU (multiplex network body ECU)
U0208
Lost Communication with "Seat Control Module A"
Lost communication with front power seat switch LH