FAIL-SAFE CHART
HINT:
If the power voltage to the tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic operation signal is again input to the tilt and telescopic ECU. Fail-Safe Operation
DTC Code | Detection Item | Fail-safe |
B2603 |
Tilt and Telescopic Manual Switch Circuit Malfunction |
Tilt and telescopic operation by manual switch is suspended. |
B2610 |
Tilt Position Sensor or Tilt Motor Circuit Malfunction |
Tilt operation is suspended. |
B2611 |
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction |
Telescopic operation is suspended. |
B2620 |
ECU Power Source Circuit Malfunction |
Tilt and telescopic operation is suspended. |
B2624 |
Vehicles Speed Malfunction |
Vehicles Speed Malfunction |
U0142 |
Lost Communication with Main Body ECU |
The tilt and telescopic operation is limited depending on which ECU has lost communication. For details, refer to Fail-safe Function. |
U0208 |
Lost Communication with "Seat Control Module A" |
1. FAIL-SAFE FUNCTION
(a) If a malfunction in the tilt position sensor signal or telescopic position sensor signal occurs while operating the power tilt or power telescopic function, the tilt and telescopic ECU stops the operation of the power tilt and power telescopic steering column system.
(b) If the power voltage to the ECU drops below approximately 8 V while operating the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.
(c) If the tilt and telescopic ECU detects that the motor has locked during the operation of the power tilt or power telescopic function, the ECU stops the operation of the power tilt and power telescopic steering column system.
(d) If the communication of an ECU that is related to the power tilt and power telescopic steering column system is interrupted, the system operates as shown below.
Tilt and Telescopic Operation | Main Body ECU Communication Interruption | Front Power Seat Switch LH Communication Interruption | All ECUs*1 Communication Interruption |
Manual |
○*2 |
○ |
X*2 |
Auto away/return |
X |
○ |
X |
Position memory (Memorization) |
X |
X |
X |
Position memory (Recall) |
X |
X |
X |
HINT:
- ○: Operates
X: Does not operate
- *1: All ECUs that are related to the power tilt and power telescopic steering column system.
- *2: The operation is permitted if the ignition switch is on while the signal from the main body ECU (multiplex network body ECU) is interrupted. The operation is prohibited if the ignition switch is off while the signal from the main body ECU (multiplex network body ECU) is interrupted.
|