Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
Tilt Position |
Current tilt position data |
Min.: 0
Max.: 65535 |
28672 to 36864 |
- |
Telesco Position |
Current telescopic position data |
Min.: 0
Max.: 65535 |
28672 to 36864 |
- |
Tilt Return Position |
Memorized tilt return position data |
Min.: 0
Max.: 65535 |
28672 to 36864 |
- |
Telesco Return Position |
Memorized telescopic return position data |
Min.: 0
Max.: 65535 |
28672 to 36864 |
- |
Tilt Up Switch |
Input state of tilt up switch |
ON or OFF |
ON: Tilt up switch activated
OFF: Tilt up switch not activated |
- |
Tilt Up SW(CAN) |
Input state of tilt up by switch |
ON or OFF |
- |
This item is not related to this vehicle |
Tilt Down Switch |
Input state of tilt down switch |
ON or OFF |
ON: Tilt down switch activated
OFF: Tilt down switch not activated |
- |
Tilt Down SW(CAN) |
Input state of tilt down switch |
ON or OFF |
- |
This item is not related to this vehicle |
Telesco Short Switch |
Input state of telescopic contract switch |
ON or OFF |
ON: Telescopic contract switch activated
OFF: Telescopic contract switch not activated |
- |
Telesco Short SW(CAN) |
Input state of telescopic contract switch |
ON or OFF |
- |
This item is not related to this vehicle |
Telesco Long Switch |
Input state of telescopic extend switch |
ON or OFF |
ON: Telescopic extend switch activated
OFF: Telescopic extend switch not activated |
- |
Telesco Long SW(CAN) |
Input state of telescopic extend switch |
ON or OFF |
- |
This item is not related to this vehicle |
T&T Manual SW Data |
Voltage data of tilt and telescopic switch (headlight dimmer switch assembly) |
Min.: 0.00 V
Max.: 4.99 V |
Neutral position: Below 0.20 V
Tilt up: 1.67 to 2.13 V
Tilt down: 0.54 to 0.74 V
Telescopic contract: 1.08 to 1.40 V
Telescopic extend: 2.22 to 2.77 V |
- |
Power Source Voltage |
Voltage data of power supply |
Min.: 0.00 V
Max.: 19.99 V |
11.00 to 14.00 V |
- |
Freeze Speed Info |
Vehicle speed data |
Min.: 0 km/h
Max.: 255 km/h |
Actual vehicle speed |
- |
IG Switch (CAN) |
Communication state of ignition switch |
ON or OFF |
ON: Communication normal
OFF: Communication interrupted |
- |
IG Switch |
Input state of ignition switch |
ON or OFF |
ON: Input signal normal
OFF: Input signal interrupted |
- |
Receive from Meter |
Communication state of combination meter assembly signal |
OK or Interpt |
OK: Communication normal
Interpt: Communication interrupted |
- |
Receive from Seat ECU |
Communication state of front power seat switch LH signal |
OK or Interpt |
OK: Communication normal
Interpt: Communication interrupted |
- |
Receive from Combi |
Communication state of combination switch ECU signal |
OK or Interpt |
OK: Communication normal
Interpt: Communication interrupted |
This item is not related to this vehicle |
J/B |
Communication state of main body ECU (multiplex network body ECU) signal |
OK or Interpt |
OK: Communication normal
Interpt: Communication interrupted |
- |
Handle Position |
Steering wheel position signal |
Away or Return |
Away: Steering wheel in away position
Return: Steering wheel in return position |
- |
The Number of DTCs |
Number of stored DTCs |
Min.: 0
Max.: 255 |
Actual number of stored DTCs |
- |