Vehicle Interior
How To Proceed With Troubleshooting
|
HINT:
- Use these procedures to troubleshoot the sliding roof system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| NEXT |
 |
|
INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| NEXT |
 |
|
CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
(a) Using the Techstream, check if the LIN communication system is functioning normally.
Result | Proceed to |
LIN communication system DTC is not output |
A |
LIN communication system DTC is output |
B |
| A |
 |
|
PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table.
Click here 
Result | Proceed to |
Fault is not listed in problem symptoms table |
A |
Fault is listed in problem symptoms table |
B |
| B |
 |
GO TO STEP 6 |
| A |
 |
|
OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Operation Check
Click here 
(b) Initialization
Click here 
(c) Terminals of ECU
Click here 
(d) Data List / Active Test
Click here 
| NEXT |
 |
|
ADJUST, REPAIR OR REPLACE
| NEXT |
 |
|
CONFIRMATION TEST
| NEXT |
 |
END |
|
Was this page helpful?