Air Conditioning Pressure Sensor

1. INSTALL AIR CONDITIONING PRESSURE SENSOR

(a) Sufficiently apply compressor oil to a new air conditioning pressure sensor. Compressor oil: ND-OIL 8 or equivalent

(b) Install the air conditioning pressure sensor.

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

(c) Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. CHARGE WITH REFRIGERANT

4. WARM UP ENGINE

5. INSPECT FOR REFRIGERANT LEAK

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. REMOVE AIR CONDITIONING PRESSURE SENSOR

(a) Disconnect the connector.

(b) Remove the air conditioning pressure sensor.