Front Blower Motor
Installation INSTALLATION PROCEDURE
1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Install the front blower motor sub-assembly with the 3 screws. |
 |
(b) Connect the connector.
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
.gif)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
Removal REMOVAL PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page .gif)
).
2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
3. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Disconnect the connector. |
.png) |
(b) Remove the 3 screws and front blower motor sub-assembly.
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.