1ar-fe Engine Control

Inspection

~1min read
INSPECTION PROCEDURE

1. INSPECT THROTTLE BODY ASSEMBLY

Text in Illustration

*1

Component without harness connected

(Throttle Body)

(a) Check that the throttle valve opens and closes smoothly.

(b) Check that there is no sludge accumulating around the throttle body.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (M-) - 2 (M+)

20 °C

0.3 to 100 Ω

If the result is not as specified, replace the throttle body assembly.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.