Park Assist / Monitoring
Removal
In this manual: Park Assist / Monitoring
~1min read
REMOVAL PROCEDURE
1. REMOVE REAR BUMPER ASSEMBLY
(See page
)
2. REMOVE ULTRASONIC SENSOR CLIP
(a) Disconnect the connector. Text in Illustration
|
![]() |
(b) Disengage the clamp.
(c) Disengage the 4 claws to remove the ultrasonic sensor clip. Text in Illustration
|
![]() |
3. REMOVE NO. 1 ULTRASONIC SENSOR
(a) Disengage the 2 claws to remove the No. 1 ultrasonic sensor. Text in Illustration
|
![]() |
4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
(a) Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly. Text in Illustration
|
![]() |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?



