Assembly overview - door

Note

• Only the left side is shown. The right side is similar
• After renewal of A-pillar, the specified torque for bolts -2 and 5- as well as for -14 and 17- changes

1 -	Front door

• Removing and installing → Chapter
• Adjusting → Chapter

2 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always
• 50 N·m

Note

• After renewal of A-pillar the specified torque changes
• Specified torque after renewal of A-pillar: 20 N·m + 90°

3 -	Door hinge

• The hinge is split. Its upper and lower sections can be renewed individually, if necessary
• Lower part is secured to hinge upper part with bolt -8-

4 -

Cap

• For bolt -8-
• Not installed in all markets

5 -

Bolt

• Installed from inside vehicle
• Loosening once to adjust door is allowed, afterwards renew always.
• For loosening and reattaching, the dash panel is not removed.
• To remove and install, the dash panel must be removed → General body repairs, interior; Rep. gr.70.
• 50 N·m

Note

• After renewal of A-pillar the specified torque changes.
• Specified torque after renewal of A-pillar: 20 N·m + 90°

6 -

Cap

• For bolts -7 and 16-
• Not installed in all markets

7 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always.
• 50 N·m

8 -

Bolt

• Connects upper part of hinge -3- to bottom part of hinge -6-
• 23 N·m

9 -	Door hinge

• The hinge is split. Its upper and lower sections can be renewed individually, if necessary.
• Upper part is secured to hinge lower part with bolt -5-

10 -

Bolt

• 30 N·m

11 -

Bolt

• Qty. 2
• 9 N·m

12 -	Door arrester

• Removing and installing → Chapter

13 -	Door hinge

• The hinge is split. Its upper and lower sections can be renewed individually, if necessary.
• Lower part is secured to hinge upper part with bolt -8-

14 -

Bolt

• Installed from inside vehicle
• Loosening once to adjust door is allowed, afterwards renew always.
• For removal and installation, A-pillar lower trim must be removed → General body repairs, interior; Rep. gr.70.
• 50 N·m

Note

• After renewal of A-pillar the specified torque changes
• Specified torque after renewal of A-pillar: 20 N·m + 90°

15 -	Door hinge

• The hinge is split. Its upper and lower sections can be renewed individually, if necessary
• Upper part is secured to hinge lower part with bolt -16-

16 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always.
• 50 N·m

17 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always.
• 50 N·m

Note

• After renewal of A-pillar the specified torque changes.
• Specified torque after renewal of A-pillar: 20 N·m + 90°