Volkswagen Golf Quiz
General body repairs, exterior

Removing and installing cover cap, for lock cylinder

In this manual: General body repairs, exterior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing and installing cover cap, for lock cylinder

Note
  • When removing lock cylinder cover cap, the screwdriver should not be turned and the screwdriver should not be used as a lever.
  • The lock cylinder and cover cap for lock cylinder are only installed on the driver side

Removing
Removing and installing cover cap, for lock cylinder
  • Pull door handle off door.
  • Push a small screwdriver -3- slightly -arrow a- into opening on underside of lock cylinder cover cap.
  • Pull lock cylinder housing cover cap -1-, together with small screwdriver, off door lightly from underside -arrow b-.
  • Push cap upwards off lock cylinder.

Installing
Removing and installing cover cap, for lock cylinder
  • Pull door handle -1- off door.
  • Push lock cylinder cover cap -2- at a slight angle from above -arrow a- onto lock cylinder.
  • Push lock cylinder cover cap -2- onto door -arrow b- until cover cap engages in lock cylinder.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.