General body repairs, exterior
Removing and installing cover cap, without lock cylinder
In this manual: General body repairs, exterior
~1min read
 Note
The cover cap is installed when no lock cylinder is fitted.RemovingSpecial tools and workshop equipment required |
|
- Remove plugs -3-.
- Insert assembly tool -T10389- approx. 44 mm into the door behind locking hook -2- of the door handle bracket.
- Pull assembly tool -T10389- approx. 5 mm backwards -arrow- until hook is detached.
- Pull door handle -1- off door -arrow a-.
- Pull cover cap -1- out of mounting bracket -arrow b-.
Installing |
- Pull door handle -2- off door in direction of -arrow a-.
- Push cover cap -1- into mounting bracket -arrow b-.
- Slightly press cover cap -1- onto door.
- Insert flat-bladed screwdriver -4- approx. 40 mm into door handle bracket until locking hook -3- is reached.
- Press cap -1- onto door.
- Push screwdriver approx. 5 mm into hole -arrow- until hook locks in place -3-.
- Insert plug -5-.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?