General body repairs, exterior

Removing and installing window channel

~1min read

Removing and installing window channel

Note
The removal and installation sequence is only for the left window channel. Removal and installation of the right window channel are similar.
Do not bend window channel when removing!

Removing

Removing and installing window channel
  • Remove window slot inner seal → Chapter.
  • Remove window slot outer seal → Chapter.
  • Remove C-pillar trim → Chapter.
  • Remove exterior mirror → Chapter
  • Pull out securing pin -2--arrow a-.
  • Peel sealing lip of window channel -1- off the door flange from the inside.
  • Pull window channel -1- out of mountings on door -arrows b and c-.
  • Pull window channel -1- off door flange -3- uniformly around entire circumference -arrows d-.
Removing and installing window channel
  • Spray window channel with soapy water to facilitate installation.
  • Insert window channel -1- into mountings on door -arrows a and b-.
  • Push window channel -1- from rear towards front onto door flange -arrows c-.
  • Fold sealing lip of window channel onto door flange from the inside.
  • Insert securing pin -2--arrow d-.
Note

To prevent wind noise, ensure window channel -1- seats evenly when installing.

Further installation is performed in the reverse order of removal .

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.