Equipment options
Assembly overview - Sun visor
![]()
Note
- The assembly overview is shown for the driver side.
- The passenger side is to be derived accordingly.

- Sun visor
- Remove and install
- Sun visor bearing
- with cover/lock
- Cover cap
- Center bearing for sun visor
- Remove and install
Removing and installing sun visor
Required special tools, testers and equipment, and auxiliary items
- Release Wedge -3409-
![]()
Note
Removal and installation are described for the driver side. Removal and installation for the passenger side is performed in the same way.
Removing

- Remove sun visor -1- from center bearing for sun visor -3-.
- Release cover/lock -2- at sun visor bearing using release wedge -3409-.

- Release retaining clip -1- and sun visor bearing -2- from body mount using release wedge -3409-.
- Guide sun visor bearing -2- out of body mount and remove sun visor -3-.
Installing
![]()
Note
Before installation, check all fasteners for damage and replace if necessary.
- Installation is carried out in reverse order.

Removing and installing center bearing for sun visor
Required special tools, testers and equipment, and auxiliary items
- Release Wedge -3409-
![]()
Note
Removal and installation are described for the driver side. Removal and installation for the passenger side is performed in the same way.
Removing

- Release cover cap -2- using release wedge -3409- and remove it from center bearing for sun visor -1-.
![]()
Note
The cover cap is also the lock of the center bearing for sun visor.
- Remove center bearing for sun visor -1- from body mount.
Installing
![]()
Note
Before installation, check all fasteners for damage and replace if necessary.
- Installation is carried out in reverse order.

Removing and installing roof grab handle
Required special tools, testers and equipment, and auxiliary items
- Release Wedge -3409-
Removing

- Fold down roof grab handle -1- and release cover caps -2- using release wedge -3409-.
- Pull cover caps -2- out as far as they will go and release roof grab handle from mounts.
![]()
Note
Alternatively, the cover caps can be released carefully using a screwdriver.
Installing
![]()
Note
Before installation, check all fasteners for damage and replace if necessary.
- Installation is carried out in reverse order.
