Checklist

Park the vehicle safely, if possible at a safe distance
from moving traffic, on level and firm ground.
Apply the parking brake firmly
Braking, stopping and parking.
Turn light switch to position 0. Lights.

Move turn signal lever to neutral position. Lights.

Automated manual transmission: move selector lever
to position D or R. Shifting.
Switch off engine and remove vehicle key from
the ignition lock. Starting and stopping the engine.
Manual transmission: engage a gear. Shifting

Allow affected bulbs to cool down.

Check whether a fuse is visibly blown
Fuses.
Replace affected bulb as described
. A bulb may only be replaced with a new bulb of the same type. The corresponding designation is printed on the bulb base or on the glass bulb.
Never touch the glass bulbs with bare fingers. A fingerprint left behind would evaporate due to the heat of the switched-on bulb and deposit on the reflector, which impairs the light output of the headlight.

After changing a bulb, check the function
of the bulb. If the bulb does not work, it may not be correctly installed, may have failed again, or the connector may not be properly plugged in.
After every bulb change in the front
area of the vehicle, have the headlight alignment checked by a qualified workshop.
Always carry out the following steps in the order given ⇒
:
Failure to observe the checklist, which is important for your own safety, can cause accidents and serious injuries.
- Always follow the steps in the checklist and observe all generally applicable safety precautions.
Always remove and install lamps carefully to avoid damaging the vehicle paint or other vehicle parts.