Instalación y extracción de la red de carga

(Opción/accesorio.)

The cargo net helps prevent objects in the cargo compartment from entering the passenger compartment in the event of a sudden stop or hard braking.

La red de carga se fija en cuatro puntos.

For safety reasons, the cargo net must always be mounted and secured according to the following description.

The net is made of strong nylon weave and can be attached in two different locations in the vehicle:

• Anclaje trasero: detrás del segundo asiento.
• Anclaje delantero: detrás de los asientos delanteros.

Instalación de la red de carga

1. 1
   Fold out the cargo net and make sure that the upper rod folds out and locks into position.
2. 2
   Insert one of the net's hooks into the front or rear ceiling mounting point with the strap lock facing you.
3. 3
   Insert the net's other upper hook into the ceiling mounting point on the opposite side.

   Los ganchos telescópicos con muelle facilitan el montaje.

   Make sure that the net's hooks are pushed forward as far as possible into their respective mounting points.

4. 4

   

   Anclaje trasero.

   Para el anclaje trasero:

   With the cargo net hooked into the rear ceiling mounting points, attach the net's straps into the front cargo anchoring eyelets in the cargo compartment.

   

   Anclaje delantero.

   Para el anclaje delantero:

   With the cargo net mounted in the front ceiling mounting points, hook the straps into the outer eyelets on the front seat rails behind the seats. Attaching the net is easier if the seat backrests are upright and the seats are moved slightly forward.

   Mueva el asiento o el respaldo solo hasta que toque la red. Moverlo con demasiada fuerza o aplicar demasiada presión sobre la red podría causar daños.

5. 5
   Tire de las correas hasta que la red de carga quede tensa.

Extracción de la red de carga

La red de carga puede retirarse y plegarse fácilmente.

1. 1
   Loosen the cargo net by pressing the button on the strap locks on each side and pulling to allow some slack.
2. 2
   Presione los retenes y suelte ambos ganchos de la correa.
3. 3
   Desenganche los ganchos superiores y retire la red de los puntos de anclaje del techo.
4. 4
   Presione el botón rojo del soporte para poder plegarla. Pliegue y enrolle la red. Guarde la red en su funda.