Kindersitze

Suitable child restraints should always be used when children (depending on their age/size) are seated in the vehicle.

Befestigung des Kindersitzes mit Sicherheitsgurt

Bauen Sie den Kindersitz nicht auf dem Beifahrersitz ein.

1. 1
   Bauen Sie den Kindersitz auf dem Rücksitz des Fahrzeugs ein.
2. 2
   Attach the seat belt to the infant seat according to the child restraint manufacturer's instructions.

   

   Prüfen Sie die Gurtführung durch den Kindersitz.

3. 3

   

   Legen Sie den Sicherheitsgurt an.

   Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinct click is audible.

   

   Ziehen Sie den Schultergurt heraus.

4. 4
   Pull the shoulder section of the seat belt out as far as possible to activate the belt's automatic locking function.
5. 5
   Press the infant seat firmly in place, let the seat belt retract and pull it taut. A sound from the seat belt retractor's automatic locking function will be audible at this time and is normal. The seat belt should now be locked in place.

   

   Stellen Sie sicher, dass das Baby richtig gesichert ist.

6. 6
   Press and pull the infant seat along the direction of the seat belt to check that it is properly held in place by the seat belt.

   

   When installing infant seats in the rear seat, Volvo recommends maintaining a distance of at least 50 mm (2 inches) from the front-most part of the infant seat to the rearmost part of the seat in front.

The infant seat can be removed by unbuckling the seat belt and letting it retract completely.