Supplementary Brake Lamp

Bulb Replacement (Sedan)
1. Open the trunk lid.
2. Remove the two screws and remove the lamp assembly. Before removing the lamp assembly, disconnect the wire connector.
3. Remove the two screws and remove the reflector assembly.
4. Remove the bulb by pulling it straight out of the socket.
5. Install a new bulb. Refer to "BULB SPECIFICATIONS".
6. Install the lamp assembly in place.

Bulb Replacement (Hatchback)
1. Open the tailgate.
2. Remove the interior trim and remove the two screws.
3. Remove the socket from the lamp assembly.
4. Remove the bulb by pulling it straight out of the socket.
5. Install a new bulb into the socket.
Refer to "BULB SPECIFICATIONS".
6. Install the lamp assembly and reinstall the interior trim.

Bulb Replacement (Van)
1. Open the tailgate.
2. Remove the two screws and remove the interior trim panel at the tailgate.
3. Remove the bulb by pulling it straight out of the socket.
4. Install a new bulb. Refer to "BULB SPECIFICATIONS".
5. Install the tailgate trim panel and tighten the two screws removed earlier.
6. Close the tailgate.
Test yourself
A quick Chevrolet Lacetti quiz: every answer comes with an explanation and a link to the manual page.