Exterior lighting / signalling
General
In this manual: Exterior lighting / signalling
~1min read
PREAMBLE
- The vehicle is fitted with the following new functions:
- automatic activation of the hazard warning lights,
- xenon lamps with automatic headlamp levelling (depending on version),
- pulse-type control of the fog lamps,
- automatic dipped-beam activation: management of exterior brightness by the light sensor (depending on version),
- multiplexed steering column switch module,
- multiplexed Engine Support Box (BSM), which manages the operation of the lamps at the front of the vehicle.
The exterior lighting and signalling functions manage the operation of the following components:

The lamps are switched on or off in one of the following ways:
- manually: the user operates a control from the steering column switch module or from a switch.
- automatically: when automatic mode is selected, the dipped-beam headlamps are switched on and off according to exterior brightness.
The switch-on or switch-off request is received by the BSI, which controls the components listed in the table below:
- either directly,
- or to the Engine Support Box (BSM) via the VAN CAR 1 network.

Note: The reverse lamps and brake lamps are operated directly by their respective switches. The BSI receives the status information from the switches.
Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?