Setting/ resuming the stored speed

Setting the speed: turn knob A to the ON position and, pressing the accelerator pedal, bring the vehicle up to the desired speed.

Then hold the lever up (+) for at least 1 second, then release it: the vehicle speed will be stored and you can release the accelerator pedal.

If necessary (e.g. when overtaking), you can accelerate by pressing the accelerator pedal: when the pedal is released, the previously set speed will be resumed.

When driving downhill with the device switched on, the vehicle speed may increase slightly above the set speed.

Resuming the stored speed: accelerate gradually until the speed is close to the stored speed, engage the gear selected when the speed was stored and press button B (RES) (fig. 71).