Rear wiper and washer
Intermittent wipe

Pull the lever towards the steering wheel
Rear wiper operation in reverse
The rear window wiper will switch on automatically when reverse gear is selected, if:
- it was not already switched on,
- the wiper lever is in position A, B, C or D and
- the front wiper is operating (when set to position B).
The rear wiper will operate at the same speed as the front wiper (in intermittent mode or at normal speed).
Rear washer

WARNING
Never operate the washer for more than 10 seconds at a time.
Do not operate the washer when the washer fluid reservoir is empty.
When you pull the lever towards the steering wheel, the washer will operate together with the wiper.
After the washing and wiping cycle ends, the front wipers will stop and then make one more sweep to dry the glass.
After you release the lever, the wipers will continue to operate for a short time.
Checking the wiper blades
Check the edge of the wiper blade for smoothness by running your finger along it.
Clean the wiper blade edges with a soft sponge dipped in water.
Test yourself
A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.