Ford Fusion Quiz
Roadside Emergencies

Hazard Warning Flashers. Fuel Shutoff

In this manual: Roadside Emergencies
Introduction — 7Environment — 1At a Glance — 1Child Safety — 9Seat Belts — 8Personal Safety System™ — 1Additional Restrictions — 8Keys and Remote Controls — 8MyKey™ — 5Doors & Locks — 10Safety — 3Steering Wheel — 5Wipers and Washers — 4Lighting — 8Automatic High Beam Control — 3Windows and Mirrors — 6Instrument Cluster — 4Information Displays — 5Climate Control — 10Seats — 9Garage Door Opener — 1Auxiliary Power Points — 3Storage Compartments — 1Starting and Stopping the Engine — 4Unique Driving Characteristics (if equipped) — 1Fuel and Refueling — 9Engine Emission Control — 5Infection Transmission — 1All-Wheel Drive — 1Brakes — 4Traction Control — 1Stability Control — 1Park Aid — 13Cruise Control — 10Driver Assistance — 14Loading — 1Tow/Haul — 5Driving Tips — 3Roadside Emergencies — 5Customer Assistance — 6Fuses — 3Maintenance — 16Vehicle Care — 9Wheels and Tires — 13Capacities and Specifications — 11Connected Vehicle — 1Wi-Fi Hotspot — 1Audio System — 7SYNC™ — 7SYNC™ 3 — 16Accessories — 1Ford Protect — 3Scheduled Maintenance — 5Appendices — 4
11steps
~66min
3/5difficulty
Done 0 of 11

Hazard Warning Flashers

Ford Fusion. Hazard Flashers. Fuel ShutoffThe hazard warning flasher control is located on the instrument panel. Use your hazard warning flashers when your vehicle creates a safety hazard for other motorists.

  • Press the hazard warning flasher control and all front and rear turn indicators will flash.
  • Press the button again to switch them off.

Fuel Pump Shut-Off

The fuel pump shutoff stops the flow of fuel to the engine in the event of a moderate or severe collision. Not every impact will cause shutoff.

If your vehicle stalls after a collision, you may restart your vehicle.

  1. If your vehicle has a key ignition system:
  2. Turn the ignition off.
  3. Turn the ignition to the OFF position.
  4. Turn the ignition off.
  5. Turn the ignition to the ON position to re-enable the fuel pump.
  6. If the vehicle does not start, repeat steps 1 through 4.

If your vehicle has a push-button start system:

  1. Press START/STOP to turn off the vehicle.
  2. Press the brake pedal and press START/STOP to start your vehicle.
  3. Take your foot off the brake pedal and press START/STOP to turn off your vehicle.
  4. You may attempt to start the vehicle by depressing the brake pedal and pressing START/STOP, or press START/STOP without depressing the brake pedal.
  5. If the vehicle does not start, repeat steps 1 through 4.

Test yourself

A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.