Doors & Locks

Remote Control

~1min read

You can use the remote control at any time. Cargo Area Release. The button only works when your vehicle speed is less than 3 mph (5 km/h).

Unlocking the Doors (Two-Stage Unlock)

Ford Fusion. Remote ControlPress the button to unlock the driver door. Press the button again within three seconds to unlock all doors. The turn signals flash.

Press and hold both the lock and unlock buttons on the remote control for three seconds to switch between driver door only or all doors unlock mode. The turn signals flash twice, indicating the change in unlock mode. Driver door only mode unlocks only the driver door when you press the unlock button once. All doors mode unlocks all doors when you press the unlock button once. The unlock mode applies to the remote control, keyless keypad and intelligent access. You can also switch between unlock modes using the information display.

Locking the Doors

Ford Fusion. Remote ControlPress the button to lock all doors. The turn signals flash.

Press the button again within three seconds to confirm that all doors are closed. The doors lock again, the horn sounds and the turn signals flash if all doors and the liftgate are closed.

Ford Fusion. Remote Control

If the central locking does not operate, lock the doors individually with the key in the position shown. On the left side, turn the key clockwise to lock. On the right side, turn the key counterclockwise to lock.

Mislock

If any door or the liftgate is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the lamps do not flash. You can turn this feature on or off in the information display.

Opening the Cargo Area

Ford Fusion. Remote ControlPress twice within three seconds to open the liftgate.

Test yourself

A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.