Ford Mustang Quiz
Engine

Connecting Rod - Bushing Diameter

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. Measure the inner diameter of the connecting rod bushing, if equipped. Verify the diameter is within specification.

  • Refer to the appropriate section in Group for the procedure.
  • If out of specification, install new components as necessary. Refer to the appropriate section in Group for the procedure.
Connecting Rod - Bushing Diameter

Connecting Rod -Bend

1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.

  • Refer to the appropriate section in Group for the procedure.
  • If out of specification, install new components as necessary. Refer to the appropriate section in Group for the procedure
Connecting Rod -Bend

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.