Ford Mustang Quiz
Engine

Crankshaft End Play

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
1special tools

Special Tool(s)

 Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent

1. Measure the crankshaft end play. Use a Dial Indicator Gauge with Holding Fixture to measure crankshaft end play.

2. Position the crankshaft to the rear of the cylinder block.

3. Zero the indicator.

4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.

  • If crankshaft end play exceeds specifications, install a new crankshaft thrust washer (6334) or crankshaft thrust main bearing (6337). Refer to the appropriate section in Group 303 for the procedure.
Crankshaft End Play

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.