Ford Mustang Quiz
Engine

Exhaust Manifold - Inspection

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
1special tools

Special Tool(s)

 Straight Edge 303-D039 (D83L-4201-A) or equivalent

1. Place a straight edge across the exhaust manifold flanges and check for warping with a feeler gauge.

Exhaust Manifold - Inspection

Bearing -Inspection

1. Inspect bearings for the following defects. Possible causes are shown:

1. Cratering - fatigue failure.

2. Spot polishing - incorrect seating.

3. Imbedded dirt engine oil.

4. Scratching - dirty engine oil.

5. Base exposed - poor lubrication.

6. Both edges worn - journal damaged.

7. One edge worn - journal tapered or bearing not seated.

Exhaust Manifold - Inspection

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.