Ford Mustang Quiz
Engine

Cylinder Head - Distortion

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
1special tools

Special Tool(s)

 Straight Edge 303-D039 (D83L-4201-A) or equivalent

1. Use a straight edge and a feeler gauge to inspect the cylinder head for flatness. If the cylinder head is distorted, install a new cylinder head.

Cylinder Head -Distortion

Cylinder Bore -Cleaning

1. CAUTION: If these procedures are not followed, rusting of the cylinder bores may occur.

Clean the cylinder bores with soap or detergent and water.

2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.

3. Use a clean, lint-free cloth and lubricate the cylinder bores.

  • Use clean engine oil meeting Ford specification.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.