Ford Mustang Quiz
Engine

Connecting Rod - Side Clearance

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. Measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.

  • Refer to the appropriate section in Group for the procedure.
  • If out of specification, install new components as necessary. Refer to the appropriate section in Group for the procedure.
Connecting Rod -Side Clearance

Roller Follower -Inspection

Push rod engines

1. Inspect the roller for flat spots or scoring. If any damage is found, inspect the camshaft lobes and valve tappet for damage.

Push rod engines

OHC engines

OHC engines

Valve Tappet -Inspection

Push rod engines

1. Inspect the hydraulic valve tappet and roller for damage. If any damage is found, inspect the camshaft lobes and valves for damage.

Push rod engines

OHC engines

OHC engines

Valve -Stem Diameter

1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.

  • Refer to the appropriate section in Group for the procedure.
  • If out of specification, install new components as necessary. Refer to the appropriate section in Group for the procedure.
Valve -Stem Diameter

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.