General Information
In this manual: General Information
~2min read
SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONS
SPECIFICATIONS FOR ADJUSTMENTS AND INSPECTION

SPECIFICATIONS
NOTE:
Front wheel scrub radius is the distance between the point where the steering axis intersects the road surface and the center of the tire contact patch with the road.
THREADED FASTENER TIGHTENING TORQUES
| Item | Torque (N·m) |
| Wheel mounting nut; Drive shaft mounting nut; Front strut damper support mounting nut (upper); Front strut assembly to steering knuckle nut (lower); Front strut support lock nut; Lower arm ball joint to steering knuckle nut; Lower arm bushing "A" mounting bolt; Lower arm bushing "G" mounting bolt; Front stabilizer bar bracket mounting bolt; Tie rod end ball joint to steering knuckle; Tie rod end lock nut; Stabilizer bar link mounting nut; Rear strut upper support mounting nut; Rear strut to wheel knuckle nut; Rear strut support lock nut; Rear stabilizer bar link to strut nut; Rear stabilizer bar bracket mounting bolt; Rear suspension lateral link end adjusting nut; Rear suspension lateral link mounting bolt; Rear cross member mounting bolt; Trailing arm to trailing arm bracket nut; Trailing arm bracket to body mounting bolt | 90 - 110 200 - 260 40 - 50 110 - 130 50 - 70 60 - 72 130 - 150 130 - 150 30 - 45 24 - 34 50 - 55 35 - 45 40 - 50 110 - 130 40 - 55 35 - 45 17 - 26 50 - 60 130 - 150 100 - 120 100 - 120 40 - 50 |

CAUTION
After removal, replace self-locking nuts with new ones.
LUBRICANTS
| Application | Recommended lubricant | Quantity |
| Lower arm ball joint; Strut mount bearing | Variant R-2 or POLY LUB GLY 801 K SAE J310a grease; Chassis grease (NLGI No. 0 or equivalent) | As required; As required |
Test yourself
A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?