Hyundai Elantra CN7 Quiz

Wheel Runout

In this manual: Wheel Runout
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read

1. Raise the wheels on one axle of the vehicle and place safety stands under the vehicle.

2. Измерьте биение колеса с помощью индикатора часового типа, как показано на

2. Measure the wheel runout with a dial indicator, as shown in the illustration.

3. Replace the wheel if its runout exceeds the maximum allowable value.

Wheel Runout [Maximum Allowable Value]:

Steel wheel: Radial 0.6 mm (average value between left and right wheels); Axial 1.0 mm. Aluminum wheel: Radial 0.3 mm; Axial 0.3 mm

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.