Hyundai Elantra CN7 Quiz

Engine Mounts - Removal

In this manual: Engine Mounts - Removal
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


ENGINE MOUNTS

REMOVAL

1. Закрепите двигатель на траверсе за кронштейны крепления и повесьте ее на подъемнике,

1. Secure the engine to the crossbar using the mounting brackets, and attach the crossbar to the hoist. Then raise the engine assembly slightly to relieve the mounts of the powertrain weight.

SIDE ENGINE MOUNT

1. Remove the side engine mount bolts (to the engine and to the body).

2. Снимите боковую опору двигателя (в сборе с кронштейном) с двигателя.

2. Remove the side engine mount (together with the bracket) from the engine.

TRANSMISSION MOUNT

1. On models with 5-speed manual transmission, remove the back-up light switch.

2. Отверните болт крепления опоры коробки передач (к опорному кронштейну КПП).

2. Remove the transmission mount bolt (to the transmission mounting bracket).

3. Remove the plugs from inside the left fender splash shield. Remove the bolts securing the transmission mount bracket to the subframe.

4. Снимите опору коробки передач в сборе.

4. Remove the transmission mount assembly.

FRONT ENGINE MOUNT

1. Снимите переднюю опору двигателя в сборе с подрамника.

1. Remove the front engine mount assembly from the subframe.

REAR ENGINE MOUNT

1. Снимите заднюю опору двигателя в сборе с подрамника.

1. Remove the rear engine mount assembly from the subframe.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.