Hyundai Genesis DH Quiz
Body Electrical System

Power Seat Control Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
8steps
~48min
2/5difficulty
Done 0 of 8

Inspection

  1. The power seat switch sends and receives signals via CAN communication, so it is not possible to check the electrical current of the switch components.
  2. Inspect the power seat system using GDS.
    Check that the power seat switch operates normally by selecting "Actuation Test" or "Current Data".

Removal

  1. Disconnect the battery negative (-) terminal.
  2. Remove the front seat outer screen cover. (Refer to Body - "Front Seat Outer Screen Cover")
  3. Loosen the screws and remove the power seat control switch (A).

Installation

  1. Install the power seat control switch.
  2. Install the front seat cushion outer cover.
  3. Connect the battery terminals.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.