Hyundai Genesis DH Quiz
Body Electrical System

Seat Heater Switch Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
11steps
~66min
3/5difficulty
Done 0 of 11

Removal

Front Seat
  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console upper cover. (Refer to Body - "Floor Console Assembly")
  3. Disconnect the connector, unscrew and remove the seat heater switch assembly (A).
  4. Disconnect the negative (-) battery terminal.
  5. Remove the cup holder bracket (A).
  6. Loosen the mounting screws (A).
  7. Using a screwdriver or a trim remover, remove the cup holder in the rear seat armrest assembly (A).
  8. Disconnect the connector (B).
  9. Remove the seat heater switch (A) after loosening the mounting screws.
Rear Seat Armrest Switch

Inspection

  1. The power seat switch sends and receives signals via CAN communication, so it is not possible to check the electrical current of the switch components.
  2. Inspect the seat heater system using GDS.
    Check that the seat heater switch operates normally by selecting "Switch Operation Check" or "Current Data".

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.