Sunroof slide
To open the sunroof, pull the sunroof control lever rearward.
To close the sunroof, push the lever forward.
Automatic slide open
To use the automatic slide function, pull the sunroof control lever on the overhead console briefly (for more than one second).
The sunroof will slide fully open.
To stop the sunroof from sliding, press any of the control buttons.
Manual slide open
Pull the sunroof control lever on the overhead console for more than 0.5 seconds.
Automatic slide close
To close the sunroof, push the sunroof control lever on the overhead console for more than one second.
The sunroof will close fully.
To stop the sunroof at the desired position, push the sunroof control lever.
NOTE
When driving with the sunroof open (or partially open), the vehicle may be buffeted by wind or produce pulsating noise.
This noise is normal and can be reduced or eliminated as follows.
If the noise occurs with the sunroof open, reduce the sunroof opening slightly.

Auto reverse
If an object or part of the body is detected during automatic closing of the sunroof, the sunroof will reverse direction and stop.
The auto reverse function does not work when a small obstacle is between the sunroof glass and its frame.
Always make sure all passengers and objects are clear of the sunroof before closing it.
WARNING - Never intentionally place any part of your body to activate the auto-close function. - The auto-close function may not work if an object becomes caught before the sunroof is fully closed.
Test yourself
A quick Hyundai i10 quiz: every answer comes with an explanation and a link to the manual page.