Turn signals and lane change signals

The turn signals only work when the ignition switch is in the ON position. To activate the turn signals, move the lever up or down (A). The green indicators on the instrument panel show which turn signal is operating.

They will turn off automatically after the turn is completed. If the indicator continues to flash after a turn, manually return the lever to the OFF position.

To signal a lane change, move the turn signal lever slightly and hold it in position (B). The lever returns to the OFF position when released.

If the indicator stays on or does not flash or flashes abnormally, one of the turn signal bulbs may be burned out and must be replaced.

Lane change short signal function (if equipped)

To activate the lane change short signal function, move the turn signal lever slightly and then release it. The lane change signals will flash 3 times.

NOTE

If a turn signal flashes too slowly or too quickly, a bulb may be burned out or there may be a faulty connection to the circuit.