Electronic Power Steering

The power steering uses the motor to help the driver steer the vehicle. If the engine is off or the electronic power steering is not working, the vehicle can still be steered, but it will require greater physical effort.

The power steering is controlled by a dedicated control unit, which senses the steering torque and vehicle speed and commands the power steering motor accordingly.

The steering becomes heavier as speed increases and lighter as speed decreases, to allow better steering control.

If you notice a change in the effort required to steer during normal use of the vehicle, we recommend having the system checked by an authorized HYUNDAI dealer.

NOTE

During normal use of the vehicle, the following conditions may occur:

- The electronic power steering warning light does not come on.

- The steering becomes heavier after the ignition is turned on.

This occurs because the system performs a diagnostic check of the electronic power steering. When the diagnostic check is complete, the steering returns to its normal condition.

- A clicking sound can be heard from the power steering relay after the ignition is turned to the ON or LOCK position.

- The motor noise can be heard when the vehicle is stationary or traveling at low speed.

- The steering effort may suddenly increase if power steering operation is interrupted to prevent a serious accident, or if a system malfunction is detected by the self-diagnosis.

- The steering may feel heavier if it is turned continuously while the vehicle is stationary. However, after a few minutes it returns to normal condition.