Hyundai i20 Quiz
Engine/Fuel Control System

Filler Neck Assembly Repair Procedures

In this manual: Engine/Fuel Control System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

DEPOSIT

  1. Open the fuel filler door, then loosen the screws securing the filler neck assembly (A).
  2. Raise the vehicle.
  3. Disconnect the filler hose (A), fuel level regulator hose (B), and vapor hose (C).
  4. Remove the filler neck assembly from the vehicle after removing the support mounting bolts (A - 2 pcs).

REMEDY

  1. To install, perform the removal procedure in reverse order. Filler neck assembly bolt: 7.8 ~ 11.8 N·m Filler neck assembly nut: 7.8 ~ 11.8 N·m

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.